Skip to content
+7 (495) 980-80-90 Request a quote

T-codes

The tank container specification (T-codes) applies to dangerous goods of classes 1 to 9. T-codes set out the requirements for portable tanks intended to carry particular substances.

Tank container specification (T-codes)

The tank container specification (T-codes) applies to dangerous goods of classes 1 to 9. T-codes provide the information needed on the provisions for portable tanks intended to carry particular types of cargo (substances). These provisions must comply with the general requirements of the United Nations Economic Commission for Europe (Recommendations on the Transport of Dangerous Goods).

T-codeMinimum test pressure (bar)Minimum equivalent shell thickness (mm)**Pressure-relief deviceBottom opening
T 11.56*Normal2
T 21.56*Normal3
T 32.656*Normal2
T 42.656*Normal3
T 52.656*With bursting discNot allowed
T 646*Normal2
T 746*Normal3
T 846*NormalNot allowed
T 946NormalNot allowed
T 1046With bursting discNot allowed
T 1166*Normal3
T 1266*With bursting disc3
T 1366NormalNot allowed
T 1466With bursting discNot allowed
T 15106*Normal3
T 16106*With bursting disc3
T 17106Normal3
T 18106With bursting disc3
T 19106With bursting discNot allowed
T 20108With bursting discNot allowed
T 211010NormalNot allowed
T 221010With bursting discNot allowed
T 23Depends on the cargoDepends on the cargoDepends on the cargoDepends on the cargo
T 50Depends on the gasDepends on the gasDepends on the gasDepends on the gas
T 75CryogenicCryogenicCryogenicCryogenic

** reference steel

* 5 mm if the diameter of the shell is less than 1.80 m

Documents

We will match a tank container to your product